manualshive.com logo in svg

ZyXEL Communications IES-1248-51V, Support Notes, Page: 71 / 90

Share
Download
ZyXEL Communications IES-1248-51V Support Notes Download Page 71

 

 

IES-1248-51V Support Notes 

 

 

70

pool according to its DSL port, VLAN ID and the option 82 string. In this case, the 

 

8-51V settings 

lick 

Advanced Application

, 

DHCP Relay 

in the navigation panel to display 

wn. You will see the 

DHCP Relay

 setup page. 

Enable the 

 page. 

PC is behind 25

th

 DSL port and the option 82 string is a string “1248”. We use the IP 

Commander as DHCP server. Its IP is 192.168.1.99 and the IP pool is between 

192.168.1.201 and 192.168.1.203 for VID=1, DSL port=25 and the option 82 string is

“1248”.  

 

1. IES-124

C

configuration screen as sho

DHCP relay and Option 82 function. Fill the IP address of DHCP server in this

The IP address is 192.168.1.99 in our case. Also, enter “1248” as the Option 82 string. 

 

 

 

2. CPE settings 

onnect CPE to the 25

th

 DSL port. Please see former applications for Detailed 

mander settings 

pen IP Commander. Right click “IP commander and then click “

connect new 

C

settings. 

 

3. IP Com

O

server

”. 

All contents copyright (c) 2007 ZyXEL Communications Corporation.   

Summary of Contents for IES-1248-51V



























































































Reviews:

No comments