manualshive.com logo in svg

ZyXEL Communications IES-1248-51V, Support Notes, Page: 25 / 90

Share
Download
ZyXEL Communications IES-1248-51V Support Notes Download Page 25

 

 

IES-1248-51V Support Notes 

 

 

24

Provide Different DSL Port Speeds to different subscribers 

 

An ISP may provide different Line speeds for each DSL port. In our IES-1248-51V 

have an easy way to configure the line speed for each port. It can create some profiles 

which can set different parameters to meet the different users’ requirement. 

In this application, we will set up two profiles. One is for low speed requirement with 

upstream/downstream is 2M/512Kbps and the other is for high speed requirement 

with upstream/downstream is 25M/1.2Kbps. We suppose there are general subscribers 

from port 1 to port 24 with a low speed profile and some enterprise users from port 25 

to port 48 with high speed profile. 

 

ADSL 

modem 

IES-1248-51V 

Port 1 

Uplink 

Internet 

Port 24 

Port 25 

Port 48 

2M/512K 25M/1.2M 

 

How to apply the profile to ports 

In this application, we need to configure IES-1248-51V and ADSL CPE. We use 

ZyXEL Prestige 660R-61 CPE here. 

1. IES-1248-51V Settings 

1.1 Profiles settings 

Click Basic Setting, xDSL Profiles Setup in the navigation panel to display 

configuration screen as shown.

 

All contents copyright (c) 2007 ZyXEL Communications Corporation.   

Summary of Contents for IES-1248-51V



























































































Reviews:

No comments