IES-1248-51V Support Notes
28
2. Prestige 660R-61 Settings
We configure Prestige 660R-61 as bridge mode. The default VPI/VCI of
IES-1248-51V is 0/33. So we need to set up such values. Prestige 660R-61
has a Telnet server inside. We need to configure it via Telnet.
2.1 Menu1: General Setup
Go to Menu 1. In this menu, we must set “Rout IP = NO” and “Bridge = YES”.
2.2 Menu4: Internet Access Setup
The encapsulation must be RFC 1483 for bridge mode. The Multiplexing should be
the same as IES-1248-51V. The LLC-based is default mode of IES-1248-51V.
Additionally, we must check if the VPI/VCI is the same as IES-1248-51V. The default
VPI/VCI of IES1248-51V is 0/33.
All contents copyright (c) 2007 ZyXEL Communications Corporation.