manualshive.com logo in svg

ZyXEL Communications IES-1248-51V, Support Notes, Page: 58 / 90

Share
Download
ZyXEL Communications IES-1248-51V Support Notes Download Page 58

 

 

IES-1248-51V Support Notes 

 

 

57

 

 

 

Setting up the IGMP Snooping/IGMP Filtering 

 

Without IGMP snooping multicast traffic is treated in the same manner as broadcast 

traffic, that is, it is forwarded to all port. With IGMP snooping, multicast traffic of a 

group is only forwarded to ports that have members of that group. IGMP snooping 

generates no additional network traffic, allowing you to significantly reduce multicast 

traffic passing through the IP-DSLAM. IGMP filtering is for allowing a port to join 

some specific IGMP groups. This can be applied in Video service providers. They can 

only open some specific channels (groups) to specific ports. 

 

                         

 

CPE 

Video 

Server 

Internet 

Ethernet Port 

Video Client

IGMP 

Router 

Port 1 

 

All contents copyright (c) 2007 ZyXEL Communications Corporation.   

Summary of Contents for IES-1248-51V



























































































Reviews:

No comments