ZyXEL Communications GS2200-24P Series, User Manual, Page: 73 / 360

GS2200-24/24P User’s Guide
73
C
H A P T E R
8
Basic Setting
8.1 Overview
This chapter describes how to configure the System Info, General Setup,
Switch Setup, IP Setup and Port Setup screens.
The System Info screen displays general Switch information (such as firmware
version number). The General Setup screen allows you to configure general
Switch identification information. The General Setup screen also allows you to
set the system time manually or get the current time and date from an external
server when you turn on your Switch. The real time is then displayed in the Switch
logs. The Switch Setup screen allows you to set up and configure global Switch
features. The IP Setup screen allows you to configure a Switch IP address in each
routing domain, subnet mask(s) and DNS (domain name server) for management
purposes.
8.1.1 What You Can Do
• Use the System Info screen ( Section 8.2 on page 74 ) to check the firmware
version number.
• Use the General Setup screen ( Section 8.3 on page 76 ) to configure general
settings such as the system name and time.
• Use the Switch Setup screen ( Section 8.5 on page 79 ) to choose your VLAN
type, set the GARP timers and assign priorities to queues.
• Use the IP Setup screen ( Section 8.6.1 on page 81 ) to configure the Switch IP
address, default gateway device, the default domain name server and the
management VLAN ID.
• Use the Port Setup screen ( Section 8.7 on page 83 ) to configure Switch port
settings.
• Use the PoE Status screens ( Section 8.7.1 on page 87 ) to view the current
amount of power that PDs are receiving from the Switch and set the priority
levels for the Switch in distributing power to PDs. (This screen is available to
GS2200-24P only.)