ZyXEL Communications GS2200-24P Series, User Manual, Page: 294 / 360

Chapter 32 Access Control
GS2200-24/24P User’s Guide
294
An OID (Object ID) that begins with “1.3.6.1.4.1.890.1.5.8” is defined in private
MIBs. Otherwise, it is a standard MIB OID.
Table 96 SNMP System Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
coldstart coldStart 1.3.6.1.6.3.1.1.5.1 This trap is sent when the
Switch is turned on.
warmstart warmStart 1.3.6.1.6.3.1.1.5.2 This trap is sent when the
Switch restarts.
temperature TemperatureEventOn 1.3.6.1.4.1.890.1.5.8.55.2
7.2.1 This trap is sent when the
temperature goes above or
below the normal operating
range.
TemperatureEventClear 1.3.6.1.4.1.890.1.5.8.55.2
7.2.2 This trap is sent when the
temperature returns to the
normal operating range.
voltage VoltageEventOn 1.3.6.1.4.1.890.1.5.8.55.2
7.2.1 This trap is sent when the
voltage goes above or below
the normal operating range.
VoltageEventClear 1.3.6.1.4.1.890.1.5.8.55.2
7.2.2 This trap is sent when the
voltage returns to the normal
operating range.
reset UncontrolledResetEventOn 1.3.6.1.4.1.890.1.5.8.55.2
7.2.1
This trap is sent when the
Switch automatically resets.
ControlledResetEventOn 1.3.6.1.4.1.890.1.5.8.55.2
7.2.1 This trap is sent when the
Switch resets by an
administrator through a
management interface.
RebootEvent 1.3.6.1.4.1.890.1.5.0.1 This trap is sent when the
Switch reboots by an
administrator through a
management interface.
timesync RTCNotUpdatedEventOn 1.3.6.1.4.1.890.1.5.8.55.2
7.2.1 This trap is sent when the
Switch fails to get the time and
date from a time server.
RTCNotUpdatedEventClear 1.3.6.1.4.1.890.1.5.8.55.2
7.2.2
This trap is sent when the
Switch gets the time and date
from a time server.
intrusionlock IntrusionLockEventOn 1.3.6.1.4.1.890.1.5.8.55.2
7.2.1 This trap is sent when
intrusion lock occurs on a port.
loopguard LoopguardEventOn 1.3.6.1.4.1.890.1.5.8.55.2
7.2.1 This trap is sent when
loopguard shuts down a port.
fanspeed FanSpeedEventOn 1.3.6.1.4.1.890.1.5.8.56.2
7.2.1
This trap is sent when the fan
speed goes above or below the
normal operating range.
FanSpeedEventClear 1.3.6.1.4.1.890.1.5.8.56.2
7.2.2
This trap is sent when the fan
speed returns to the normal
operating range.