ZyXEL Communications GS-4012F, User Manual

Page: 226 / 306

GS-4012F User’s Guide
Chapter 39 Introducing the Commands 225
Note: The
write memory
command is not available in User mode.
You must save your changes after each CLI session. All unsaved configuration
changes are lost once you restart the switch.
39.8.1 Logging Out
In User mode, enter the
exit
or
logout
command to log out of the CLI.
39.9 Command Summary
The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in the same order as they are
displayed in the CLI. See the related section in the User’s Guide for more background
information.
39.9.1 User Mode
The following table describes the commands available for User mode.
Table 88 Command Summary: User Mode
COMMAND DESCRIPTION
enable Accesses Enable (or privileged) mode. See Section 39.9.2
on page 226 .
exit Logs out from the CLI.
help
Displays help information.
history Displays a list of previously command(s) that you have
executed. The switch stores up to 256 commands in
history.
logout Exits from the CLI.
ping <IP|host-name>
[<in-band|out-of-
band|vlan <vlan-id>]
[size <0-1472>]
[-t]
Sends a Ping request to an Ethernet device.
show hardware-monitor <C|F>
Displays current hardware monitor information with the
specified temperature unit (Celsius C or Fahrenheit F).
ip
Displays IP related information.
system-information Displays general system information.