ZyXEL Communications G-302 V3, User Manual

Page: 44 / 81

ZyXEL G-302 v3 User’s Guide
40 Chapter 3 ZyXEL Utility Configuration
3.2.2.2 WPA/WPA2
Note: You can use WPA and WPA2 with the G-302 v3 only on Microsoft Windows XP
or Windows 2000. At the time of writing this function is not yet available on
Windows Vista.
Figure 16 Security Settings: WPA/WPA2
The following table describes the labels in this screen.
Next Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 3.2.3 on page 42 .
Exit Click Exit to return to the Site Survey screen without saving.
Table 6 Security Settings: WEP (continued)
LABEL DESCRIPTION
Table 7 Security Settings: WPA/WPA2
LABEL DESCRIPTION
Encryption Type The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (
TKIP or AES ) for data encryption.
Refer to Section 2.2.3 on page 31 for more information.
Authentication
Type
Select an authentication method from the drop down list. Options are TLS , TTLS
and PEAP .
Login Name Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
Password This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
Certification This field is only available when you select TLS in the Authentication Type field.
Select a certificate used by the authentication server to authenticate the G-302 v3.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Validate Server
Certificate
Select the check box to check the certificate of the authentication server.