ZyXEL Communications G-302 V3, User Manual

Page: 46 / 81

ZyXEL G-302 v3 User’s Guide
42 Chapter 3 ZyXEL Utility Configuration
3.2.3 Confirm Save Screen
Use this screen to confirm and save the security settings.
Figure 18 Confirm Save Screen
The following table describes the labels in this screen.
3.3 The Profile Screen
A profile is a set of wireless parameters that you need to connect to a wireless network. With a
profile activated, each time you start the G-302 v3, it automatically scans for the specific SSID
and joins that network with the pre-defined wireless security settings. If the specified network
is not available, the G-302 v3 will be disconnected.
If you do not configure and activate a profile, each time you start the G-302 v3, the G-302 v3
uses the default profile to connect to any available network with security disabled.
The default profile is a profile that allows you to connect to any SSID without security.
Table 9 Confirm Save Screen
LABEL DESCRIPTION
Network Name
(SSID)
This field displays the SSID previously entered.
Network Type This field displays the network type ( Infrastructure or Ad Hoc ) of the wireless
device.
Channel This field displays the channel number used by the profile.
Security This field shows whether data encryption is activated ( WEP , WPA , WPA2 , WPA-
PSK or WPA2-PSK ) or inactive ( DISABLE ).
Back Click Back to return to the previous screen.
Save Click Save to save the changes back to the G-302 v3 and display the Link Info
screen.
Exit Click Exit to discard changes and return to the Site Survey screen.