ZyXEL Communications ES-2024 Series, User Manual, Page: 173 / 282

Chapter 23 IP Source Guard
ES-2024 Series User’s Guide
173
23.2 IP Source Guard
Use this screen to look at the current bindings for ARP inspection. Bindings are used by ARP
inspection to distinguish between authorized and unauthorized packets in the network. The
Switch learns the bindings from information provided manually by administrators (static
bindings). To open this screen, click
Advanced Application > IP Source Guard .
Figure 95 IP Source Guard
The following table describes the labels in this screen.
23.3 IP Source Guard Static Binding
Use this screen to manage static bindings for ARP inspection. Static bindings are uniquely
identified by the MAC address and VLAN ID. Each MAC address and VLAN ID can only be
in one static binding. If you try to create a static binding with the same MAC address and
VLAN ID as an existing static binding, the new static binding replaces the original one. To
open this screen, click
Advanced Application > IP Source Guard > Static Binding .
Table 58 IP Source Guard
LABEL DESCRIPTION
Index This field displays a sequential number for each binding.
MAC Address This field displays the source MAC address in the binding.
IP Address This field displays the IP address assigned to the MAC address in the
binding.
Lease This field displays how many days, hours, minutes, and seconds the
binding is valid; for example, 2d3h4m5s means the binding is still valid for
2 days, 3 hours, 4 minutes, and 5 seconds. This field displays infinity if the
binding is always valid (for example, a static binding).
Type This field displays how the Switch learned the binding.
static : This binding was learned from information provided manually by an
administrator.
VID This field displays the source VLAN ID in the binding.
Port This field displays the port number in the binding. If this field is blank, the
binding applies to all ports.