ZyXEL Communications Dimension ES-2008 User Manual Download Page 71

Page: 71 / 168

Dimension ES-2008 Ethernet Switch

VLAN 9-7

The default VLAN ID for all ports is

This feature is useful for accommodating devices that you want to
participate in the VLAN but that don't support tagging. Only one untagged
VLAN is allowed per port.

Ingress
Filtering

Select

Enable

from the drop-down list box to forward a frame whose VID is

the same as the VID of the port.
Select

Disable

to forward all frames, regardless of the port's VID.

Acceptable
Frame Type

Select

All

from the drop-down list box to accept all untagged or tagged

frames.
Select

Tag Only

to drop all untagged frames.

Summary of Contents for Dimension ES-2008









































































































































































Search results

Summary of Contents for Dimension ES-2008

Reviews:

Related manuals for Dimension ES-2008

Brands by name

Popular brands

ZyXEL Communications Dimension ES-2008, User Manual

Search results

Summary of Contents for Dimension ES-2008

Reviews:

Related manuals for Dimension ES-2008

Brands by name

Popular brands