ZyXEL Communications Dimension ES-2008, User Manual

Page: 118 / 168

Dimension ES-2008 Ethernet Switch
16-4 Protocol Related Configuration
Table 16-1 SMT: STP Per Port Setting
FIELD DESCRIPTION
Port This read-only field displays the port number on the switch.
State This read-only field displays the state of the port. The state can be
Forward , Disable , Blocking , Learning and Listening .
Path Cost Enter a number between 1 and 65535 in the Path Cost field. The smaller
the number the lower the path cost is for the port.
Priority
Enter a number between 0 and 255 in the Priority field. The smaller the
number, the higher the priority.
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
16.3 SNMP Configuration
Refer to the SNMP chapter for more information on SNMP.
To configure SNMP, use the menus in the SNMP Configuration screen as shown next.
Figure 16-6 SMT: SNMP Configuration
16.3.1 System Options
Use the System Options screen to set up system parameters for SNMP.
Intelligent Switch : SNMP Configuration
===================
System Options
Community Strings
Trap Managers
Previous Menu
Configure the system information.
Tab=Next Item BackSpace=Previous Item Enter=Select Item