ZyXEL Communications AMG1202-T series User Manual Download Page 261

Page: 261 / 320

Appendix A Setting up Your Computer’s IP Address

AMG1302/AMG1202-TSeries User’s Guide

261

Using the K Desktop Environment (KDE)

Follow the steps below to configure your computer IP address using the KDE.

Click the Red Hat button (located on the bottom left corner), select

System Setting

and click

Network

Figure 150

Red Hat 9.0: KDE: Network Configuration: Devices

Double-click on the profile of the network card you wish to configure. The

Ethernet Device

General

screen displays as shown.

Figure 151

Red Hat 9.0: KDE: Ethernet Device: General

• If you have a dynamic IP address, click

Automatically obtain IP address settings with

and

select

dhcp

from the drop down list.

• If you have a static IP address, click

Statically set IP Addresses

and fill in the

Address

Subnet mask

, and

Default Gateway Address

fields.

Click

to save the changes and close the

Ethernet Device General

screen.

Summary of Contents for AMG1202-T series

































































































































































































































































































































Search results

Summary of Contents for AMG1202-T series

Reviews:

ZyXEL Communications AMG1202-T series, User Manual, Page: 261 / 320

Search results

Summary of Contents for AMG1202-T series

Reviews: