manualshive.com logo in svg

ZyXEL Communications AMG1202-T series, User Manual, Page: 210 / 320

Share
Download
ZyXEL Communications AMG1202-T series User Manual Download Page 210

Chapter 21 TR-069 Client

AMG1302/AMG1202-TSeries User’s Guide

210

Figure 105   

Maintenance > TR-069 Client

The following table describes the fields in this screen. 

Table 80   

Maintenance > TR-069 Client

LINK

DESCRIPTION

CWMP

Select 

Enable

 to allow the AMG1302/AMG1202-TSeries to be managed by a management 

server or select 

Disable

 to not allow the AMG1302/AMG1202-TSeries to be managed by a 

management server.

ACS URL

Type the IP address or domain name of the management server. If the AMG1302/AMG1202-
TSeries is behind a NAT router that assigns it a private IP address, you will have to 
configure a NAT port forwarding rule on the NAT router.

ACS User Name The user name is used to authenticate the AMG1302/AMG1202-TSeries when making a 

connection to the management server. This user name on the management server and the 
AMG1302/AMG1202-TSeries must be the same. Type a user name of up to 255 printable 
characters found on an English-language keyboard. Spaces and characters such as 
@#$%^&*()_+ are allowed.

ACS Password

The password is used to authenticate the AMG1302/AMG1202-TSeries when making a 
connection to the management server. This password on the management server and the 
AMG1302/AMG1202-TSeries must be the same. Type a password of up to 255 printable 
characters found on an English-language keyboard.

Connection 
Request Path

Type the IP address or domain name of the AMG1302/AMG1202-TSeries. The management 
server uses this path to verify the AMG1302/AMG1202-TSeries.

Connection 
Request Port

The default port for access to the AMG1302/AMG1202-TSeries from the management server 
is port 7547. If you change it, make sure it does not conflict with another port on your 
network and it is recommended to use a port number above 1024 (not a commonly used 
port). The management server should use this port to connect to the AMG1302/AMG1202-
TSeries. You may need to alter your NAT port forwarding rules if they were already 
configured.

Connection 
Request 
UserName

The user name is used to authenticate the management server when connecting to the 
AMG1302/AMG1202-TSeries. Type a user name of up to 255 printable characters found on 
an English-language keyboard. Spaces and characters such as @#$%^&*()_+ are allowed.

Connection 
Request 
Password

The password is used to authenticate the management server when connecting to the 
AMG1302/AMG1202-TSeries. Type a password of up to 255 printable characters found on an 
English-language keyboard. Spaces are not allowed.

Inform

Select 

Enable

 to have the AMG1302/AMG1202-TSeries periodically send information to the 

management server (recommended if CWMP is enabled) or select 

Disable

 to not have the 

AMG1302/AMG1202-TSeries periodically send information to the management server

Inform Interval

The interval is the duration in seconds for which the AMG1302/AMG1202-TSeries must 
attempt to connect with the management server to send information and check for 
configuration updates. Enter a value between 1 and 86400 seconds.

Summary of Contents for AMG1202-T series

































































































































































































































































































































Reviews:

No comments