manualshive.com logo in svg

ZyXEL Communications AMG1202-T series, User Manual, Page: 213 / 320

Share
Download
ZyXEL Communications AMG1202-T series User Manual Download Page 213

AMG1302/AMG1202-TSeries User’s Guide

213

C

H A P T E R

      2 2

System Settings

22.1  Overview

This chapter shows you how to configure system related settings, such as system time, password, 
name, the domain name and the inactivity timeout interval.   

 

22.1.1  What You Can Do in the System Settings Screens

• Use  the 

System

 screen (

Section 22.2 on page 213

) to configure system settings.

• Use  the 

Time Setting 

screen (

Section 22.3 on page 213

) to set the system time.

22.2  The System Screen

Use this screen to configure system admin password.

Click 

Maintenance > System

 to open the screen as shown. 

Figure 106   

Maintenance > System

The following table describes the labels in this screen. 

22.3  The Time Screen 

Use this screen to configure the AMG1302/AMG1202-TSeries’s time based on your local time zone. 
To change your AMG1302/AMG1202-TSeries’s time and date, click 

Maintenance > System > 

Time Setting

. The screen appears as shown.

Table 81   

Maintenance > System

LABEL

DESCRIPTION

Administrator 
Inactivity Timer

Type how many seconds a management session (either via the web configurator) can be 
left idle before the session times out and you have to log in again. Very long idle timeouts 
may have security risks. A value of "0" means a management session never times out, no 
matter how long it has been left idle (not recommended).

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Summary of Contents for AMG1202-T series

































































































































































































































































































































Reviews:

No comments