manualshive.com logo in svg

ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series, User Manual

The ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series is a powerful security gateway device that provides high-speed internet access and advanced network protection. To ensure a hassle-free setup and configuration, you can easily download the free user manual from our website, manualshive.com, to optimize your experience.

Share
Download
background image

P-662H/HW-D Series User’s Guide

Chapter 1 Getting To Know Your ZyXEL Device

45

1.1.1.1  P-662HW Wireless Features

Wireless LAN

The ZyXEL Device supports the IEEE 802.11g standard, which is fully compatible with the 
IEEE 802.11b standard, meaning that you can have both IEEE 802.11b and IEEE 802.11g 
wireless clients in the same wireless network.

Note: 

The P-662HW may be prone to RF (Radio Frequency) interference from other 
2.4 GHz devices such as microwave ovens, wireless phones, Bluetooth 
enabled devices, and other wireless LANs.

Wi-Fi Protected Access

Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i security specification standard. 
Key differences between WPA and WEP are user authentication and improved data 
encryption.

Wireless g+

Wireless g+ technology allows super fast transmission rates (actual speed depends on 
environment) among Wireless g+ enabled access points and wireless clients.

Antenna 

The ZyXEL Device is equipped with a detachable SMA 5dBi high gain Antenna to provide 
clear radio signal between the wireless stations and the access points. 

Wireless LAN MAC Address Filtering

Your ZyXEL Device can check the MAC addresses of wireless stations against a list of 
allowed or denied MAC addresses.

WEP Encryption

WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless 
network to help keep network communications private.

OTIST (One Touch Intelligent Security Technology)

OTIST allows your ZyXEL Device to assign its ESSID and security settings (WEP or WPA-
PSK) to the ZyXEL wireless adapters that support OTIST and are within transmission range. 
The ZyXEL wireless adapters must also have OTIST enabled.

1.1.2  Applications for the ZyXEL Device

Here are some example uses for which the ZyXEL Device is well suited.

Summary of Contents for 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

Arris Touchstone MG2402G User Manual preview
Touchstone MG2402G
Brand: Arris Pages: 8
H3C Voice Gateway H3C VG 10-10 Safety Manual preview
Voice Gateway H3C VG 10-10
Brand: H3C Pages: 31
H3C SR6602-I AI Series Installation Manual preview
SR6602-I AI Series
Brand: H3C Pages: 80
H3C SR6602-I AI Series Hardware Information preview
SR6602-I AI Series
Brand: H3C Pages: 33
H3C SecPath M9000 Series Quick Manual preview
SecPath M9000 Series
Brand: H3C Pages: 4
H3C SecPath M9000 Series Installation, Quick Start preview
SecPath M9000 Series
Brand: H3C Pages: 15
H3C MSR3610-I Series Installation, Quick Start preview
MSR3610-I Series
Brand: H3C Pages: 5
H3C SecPath M9000 Series Compliance And Safety Manual preview
SecPath M9000 Series
Brand: H3C Pages: 57
Sangoma Vega 100G Quick Start Manual preview
Vega 100G
Brand: Sangoma Pages: 2
AudioCodes Mediant 1000 MSBG Cli Reference Manual preview
Mediant 1000 MSBG
Brand: AudioCodes Pages: 160
WAGO 758-918 Manual preview
758-918
Brand: WAGO Pages: 76
Synapse SNAPconnect E12 User Manual preview
SNAPconnect E12
Brand: Synapse Pages: 35
Motorola RG3000 User Manual preview
RG3000
Brand: Motorola Pages: 46
Motorola HH1620 Specifications preview
HH1620
Brand: Motorola Pages: 4
Motorola Netopia 7107-65 User Manual preview
Netopia 7107-65
Brand: Motorola Pages: 22
Motorola EASY START KIT HMEZ1000 - CELL PHONE SET UP Specifications preview
EASY START KIT HMEZ1000 - CELL PHONE SET UP
Brand: Motorola Pages: 2
Motorola Netopia 2200 Series Specification Sheet preview
Netopia 2200 Series
Brand: Motorola Pages: 5
Motorola Netopia 2247-62 Specification Sheet preview
Netopia 2247-62
Brand: Motorola Pages: 5

Brands by name

Popular brands

Load more brands