Zycoo COOFONE-D60 User Manual Download

Page: 47 / 80

SIP Encryption

Enable/Disable SIP Encryption.

SIP Encryption Key

Set the key for sip encryption.

RTP Encryption

Enable/Disable RTP encryption.

RTP Encryption Key

Set the key for RTP encryption.

Enable Auto Answer

Enable Auto Answer by selecting it.

Auto Answer Timeout

Specify Auto Answer Time, the phone auto answers the incoming call after Auto

Answer Time.

Enable Session Timer

Set Enable/Disable Session Timer, whether support RFC4028.It will refresh the SIP

sessions.

Session Timeout

Set the session timeout.

Subscribe for MWI

Enable the Subscribe for MWI by selecting it, the phone will send subscribe message

for MWI to the SIP Server.

MWI Number

Specify the MWI Number; Please contact your system administrator for the

connecting code. Different systems have different codes.

Subscribe Period(s)

Overtime of resending subscribe packet. Suggest using the default configuration.

Conference Type

Specify the Conference Type, if you select the local, you needn’t input the

conference number.

Conference Number

Specify the network conference number, please contact your system administrator

for the network conference number.

Registration Expire(s)

Set expire time of SIP server register, default is 60 seconds. If the register time of

the server requested is longer or shorter than the expired time set, the phone will

change automatically the time into the time recommended by the server, and

Enable Service Code

If you want to realize the following function by the server, please enter the On Code

and Off Code option, then when you choose to enable/disable following function on

your IP phone, it will send message to the server, and the server will turn on/off the

function immediately.

DND On Code

Set the DND On Code, When you press the DND hot key, the phone will send a

message to the server, and the server will turn on the DND function. Then any calls

to the extension will be rejected by the server automatically. And the incoming call

record will not be displayed in the Call History.

DND Off Code

Set the DND Off Code, When you press the DND hot key, the phone will send a

message to the server, and the server will turn off the DND function.

Always CFwd On Code

Set the Always CFwd On Code, when you choose to enable the always forward

function on your phone, it will send message to the server, and the server will turn

on the function immediately. When there are calls to the extension, the server will

always forward it to the set number automatically. And the IP phone will not show

the record in the call history anymore.

Always CFwd Off Code

Set the Always CFwd Off Code, when you choose to disable the always forward

function on your phone, it will send message to the server, and the server will turn

off the function immediately.

Busy CFwd On Code

Set the Busy CFwd On Code, when you choose to enable the busy forward function v

on your phone, it will send message to the server, and the server will turn on the

function immediately. When there are calls to the extension, the server will forward

Summary of Contents for COOFONE-D60















































































Search results

Summary of Contents for COOFONE-D60

Reviews:

Related manuals for COOFONE-D60

Brands by name

Popular brands

Zycoo COOFONE-D60, User Manual

Search results

Summary of Contents for COOFONE-D60

Reviews:

Related manuals for COOFONE-D60

Brands by name

Popular brands