Zycoo COOFONE-D60 User Manual Download Page 24

Page: 24 / 80

Chapter 5

Other Functions

5.1

Auto Handdown

1. Press

Menu ->Features-> Enter->Auto Handdown-> Enter

2. Enable the mode through the navigation key, then set Time, unit is minute, then press

Save

3. When the call ends, after the time that you have set, the phone will back to the idle mode.

5.2

Ban Anonymous Call

1. Press

Menu ->Features-> Enter->Ban Anonymous Call-> Enter.

2. Choose which sip you want to enable Ban Anonymous Call, and then press

Enter

, choose

Enabled

Disabled

through navigation key.

3. If you choose Enabled, the others can’t call the phone by anonymous. If you choose Disabled, the others can call

the phone by anonymous.

5.3

Dial Plan

1. Press

Menu ->Features-> Enter->Dial Plan-> Enter

2. The following plans you can set: Press “

“ to Send, Timeout to Send, Timeout, Fixed Length Number, Press “

” to

Do BXFER, BXFER On On-hook, AXFER On On-hook. You can enable or disable each dial plan.

5.4

Dial Peer

1. Press

Menu ->Features-> Enter->Dial Peer-> Enter

2. Press

Add

to enter the Edit interface, and then input number and destination. For example: Number:1,

Destination:1234, Then press

Save

3. Input 1# number in the dial interface, you can dial out 1234.

You can refer to 8.3.3.4

5.5

Auto Redial

1. Press

Menu ->Features-> Enter->Auto Redial-> Enter

2. Choose Mode

Enabled

Disabled

through the navigation key. If you choose

Enable, you also need to set

Interval and Times, and then press

Save

3. After enable auto redial, calling out someone, if he/she is busy, it will pop up a prompt box whether to auto

redial, press

, the phone will call out him according the Interval and Times that you set.

Summary of Contents for COOFONE-D60















































































Search results

Summary of Contents for COOFONE-D60

Reviews:

Related manuals for COOFONE-D60

Brands by name

Popular brands

Zycoo COOFONE-D60, User Manual

Search results

Summary of Contents for COOFONE-D60

Reviews:

Related manuals for COOFONE-D60

Brands by name

Popular brands