Zycoo COOFONE-D60 User Manual Download Page 39

Page: 39 / 80

In chart

1, there is a layer 2 that switches without setting VLAN. Any broadcast frame will be transmitted to the other ports

except the send port. For example, a broadcast information is sent out from port 1 then transmitted to port 2,3and

In chart 2, red and blue indicate two different VLANs in the switch, and port 1 and port 2 belong to red VLAN, port

3 and port 4 belong to blue VLAN. If a broadcast frame is sent out from port 1, switch will transmit it to port 2, the

other port in the red VLAN and not transmit it to port3 and port 4 in blue VLAN. By this means, VLAN divide the

broadcast domain via

restricting the range of broadcast frame transition.

Note: chart 2 use red and blue to identify the different VLAN, but in practice, VLAN uses different VLAN IDs to

identify.

Summary of Contents for COOFONE-D60















































































Search results

Summary of Contents for COOFONE-D60

Reviews:

Related manuals for COOFONE-D60

Brands by name

Popular brands

Zycoo COOFONE-D60, User Manual

Search results

Summary of Contents for COOFONE-D60

Reviews:

Related manuals for COOFONE-D60

Brands by name

Popular brands