Zwilling FRESH & SAVE VACUUM STARTER SET, User Manual

Page: 23 / 92

www.zwilling.com
23
GB
The pump stops
during the vacuum
sealing process
and does not turn
back on.
The pump sucked
in liquids during
the vacuum seal-
ing process.
Do not turn the pump upside
down. Shake the pump
slightly to remove any liquid.
Make sure the pump and the
charging station are com-
pletely dry. Plug the pump into
the charging station for one
second to reset, then remove it
and push the On/Off button.
Additional liquids may drip
out. Repeat this process if the
pump stops again.
Customer Service
Please contact our customer service should you encounter any problems
with your vacuum pump. Detailed information on service, repairs and
warranty can be found at www.zwilling.com/service.
Disposal
Do not dispose of the appliance with household waste.
For an eco-friendly disposal, please return your old
appliance to a collection point for electrical appliances.
Separate collection of individual components of EE equip-
ment prevents negative effects of environmental pollution
and minimises danger to human health, which may occur
as a result of improper product disposal. In addition, it
enables reuse and recovery of the materials, thus saving
energy and raw materials.
ZWILLING J.A. HENCKELS (UK) LTD
16 Handley Page Way,
Old Parkbury Lane,
Colney Street, St Albans, AL2 2DQ
UNITED KINGDOM
Troubleshooting/Customer Service/Disposal