background image

 

 

10 

                                                                            [email protected]      *      1-888-861-7351      *      www.zuum.life                                                ZM0915 

 

 

Advanced:   

 

 

IP ADDRESS 

Change IP address 

SUBNET MASK 

Change Subnet mask 

GATEWAY IP 

Change Gateway IP 

MEDIA TYPE 

Change 10/100/Auto detect 

DHCP CLIENT 

When setup as Enable, the MATRIX host will automatically get IP Address

 

Subnet Mask, Gateway. If setup as Disable, the MATRIX host IP Address

Subnet 

Mask

Gateway need to set from Matrix console.   

AUTO RESET 

The terminal connection will support 4 users on line at same time; this function can 

setup the connect time to avoid long connections with users. When over the set connect 

time, the terminal will automatically disconnect the link. . (0: no time setup, 1 ~ 255 

Minute time range that can be setup)   

DEVICE NAME 

Can change device name 

MAC ADDRESS 

Click to enter MAC Filter setup page 

ONLINE 

Terminal connection users display, the max. 4 users on line. 

MEMORY 

Click to enter memory setup page 

MAC FILTER 

Click to enter MAC Filter setup page 

ALIASES 

Click to enter Aliases setup page 

BACK 

Back to SWITCH SETTING page 

APPLY 

Click Apply after setting changes 

 
 
 
 

Summary of Contents for H10X10













Reviews: