EZ1
TM
DRAINAGE SERIES
EZ1
TM
FLOOR DRAIN INSTALLATION INSTRUCTIONS
Zurn Industries, LLC
|
Specification Drainage Operation
1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929
In Canada
|
Zurn Industries Limited
3544 Nashua Drive, Mississauga, Ontario L4V 1L2 · Ph. 905-405-8272, Fax 905-405-1292
www.zurn.com
Rev.
C
Date:
02/27/2018
C.N. No.
139680
Form No. FD97
Page
6 of 6
®
For Correcting a Tilted Drain (Steps 15, 16 and
17)
15. Remove strainer and strainer frame from installed head
assembly.
See Fig. 15
16. A shim set and longer screws are included under the label
of the rough-in cover.
Install shims on shank and adjust/rotate shims as needed
to bring strainer level with the finished floor. (Included
shims can adjust for up to 1/4" [6 mm] of tilt. See Fig. 16
17. Reinstall strainer frame and strainer. Use included longer
screws as needed. Torque screws to 16-18 in-lbs [18.5-
20.5 cm-kg]
Remove protective label from strainer once construction is
complete. See Fig. 17a for Slab on Grade Installation and
Fig. 17b for tile installation
Fig. 15
Fig. 16
Fig. 17b
Fig. 17a
