2018v0
9
Basic – BigBasic – Top – FastTop
Unscrew the five principal screws of the squeezing system parts.
Remove the two squeezing drums, the two
male parts and knifepiece pulling it outwards.
Be careful with this part, because of its cutting
edge.
For the models with the upper feeder
component,
twist softly the upper metal
basket all the way towards the left and then
gently pull up. Remove the turning dish by
unscrewing the screw towards the right.
Thoroughly clean all parts, and block of the machine with cold water and detergent.
Do not use abrasive nor dissolvent products, since they could harm the compound of the
elements of the machine. Do not clean the machine with water under pressure.
Dry the components of the system and the block of the machine.
Máx. 25ºC
