Zumex Group S.A.
Tel. +34 961 301 251. [email protected].
Zumex Service
Tel: +34 960 800 999.
www.zumex.com
Disassembly instructions
Take off the feeder
basket
.
Press the side tabs to remove the
bin
.
Take off the
automatic PulpOut System
, by
lifting the assembly with the part closest to
you.
Pull off the peel ejectors.
Remove the waste trolleys from the base
to empty them.
Take off the
feeder plate
by unscrewing the
central knob.
Remove the
blade
by pressing on the centre
and pulling the handle towards you.
Caution!
Put the protector on the cutting zone.
Remove the
Speed Up Tap
by easily un-
screwing it.
Unscrew the securing knobs of the pressing
units. Take off the pressing units in pairs.
Clean the inside of the
podium
, following
the steps shown and removing all the par-
ticles which have adhered.
Turn the knobs and take off the
front cover
as well as the side outputs.
Assemble the blade protector.
Remove the stainless-steel
peel guides
.
Clean the front zone of the machine, fo-
llowing the steps shown and removing all
the particles which have adhered.
Once you have dismounted all the parts,
proceed to the deep cleaning, following the
steps described..
The cleaning process will be explained in details for each one of the machine’s components below.
Caution!
For a correct cleaning process, please follow the instructions
below. Before getting started, make sure that the machine is nplugged
from mains power.
1
7
4
10
13
2
8
5
11
14
3
9
6
12
15
