background image

ZIP4x5 User’s Guide

14

Manual Part # 90-18401

Encryption

View system encryption settings by selecting Menu | Protected Settings

| Audio | Encryption. If 

always on

 or 

never on

 is selected, pressing the

Encrypt button will have no effect on your conversation. If this

parameter is set to 

normally on

 or 

normally off

, the status of the Encrypt

button overrides the system setting.
Press the Encrypt button to enable Encryption from your ZIP4x5. The

Encrypt LED is continuously green when Encryption is enabled. To

disable encryption, press the Encrypt button again.

Calculator

Press the Calc button to enter calculator mode. The phone displays the

word 

Calculator

 on the top row and lights the calculator button LED

continuous green. Press the Calc button again to exit calculator mode. 
The following keypad buttons support calculator operations:

The number keys enter digits into the calculator. 

The * key enters a decimal point. 

The Redial, Conf, Trans, and Hold buttons specify addition,

subtraction, multiplication, and division operations.

The speaker key performs the specified operation.

The # key clears the current entry.

The Func key clears all numbers and arithmetic operations.

Summary of Contents for ZIP4x5

















Reviews: