MXmeeting Release v6.0 M200/M500 & M800/M1000
Admin Guide (0000000202)/ Revision 7 5/9/2016
© 2016 Zultys, Inc. No reproduction of distribution without permission
Page 4 of 42
Technical
Publications
Power cord. Power brick (for M200/M500 only)
Brackets (for M800/M1000)
1.1
Accessing your M200/M500 Web Conferencing Appliance
There are two ways to access the M200/M500 appliance: by using plug-and-play or by using an
Ethernet crossover-cable. To access the M800/M1000 appliance use plug-and-play. In all
cases, an Internet browser needs to be used to access and configure the server.
1.2
Plug-and-Play
This method requires that you have:
A DHCP server on your network
A computer with Microsoft Windows (98, 2000, XP or Vista)
It is important to follow the instructions below to start the server for initial setup:
1.
Connect the server with an Ethernet cable (not the crossover-cable in the package) to
your network
2.
Plug in the power cord to automatically power on the server
3.
Wait for the ready light to turn green. This usually takes about 30 seconds.
Open a browser on your computer and type “
http://myonlinemeeting
”. The following page
should appear:
