MXmeeting Release v6.0 M200/M500 & M800/M1000
Admin Guide (0000000202)/ Revision 7 5/9/2016
© 2016 Zultys, Inc. No reproduction of distribution without permission
Page 27 of 42
Technical
Publications
the Password for the user specified in the User DN field
Below is a sample setting to integrate with an Active Directory. The sample setting allows only
the users in the "WebMeeting" user group to access this system.
Figure 2.19 Enable LDAP integration
Only LDAP Version 3 is supported. No SSL encryption can be used for User DN and Password
authentication. If a user with valid credentials fails to pass authentication by your LDAP server,
check the following:
Your LDAP configuration meets with the work conditions of this system.
Your LDAP entries have the "distinguishedName" (DN) attribute filled with proper values.
Empty values are not allowed. A Microsoft Active Directory server should automatically
fill proper values for the attribute.
You can test whether individual users can be found for the given LDAP settings as shown in
Figure 2.20. Enter the login name and password for a specific user. The resulting page will say
either “LDAP authentication succeeds” or show a detailed trace of where the LDAP
authentication failed.
