Zultys BPS12, Hardware Manual

Page: 31 / 44

5. Installing the BPS12
27
Figure 5-7 displays the proper placement of the BPS12 with the brackets mounted on the
front side of the device.
2. While holding the chassis in place, use a hand screwdriver to screw the four 12-24 mounting
screws into place on the flanges.
1
Do not tighten the screws.
3. Once mounted in position with the screws in place, use a power screwdriver to tighten all
four screws.
Figure 5-7 Mounting the BPS12 in an Equipment Rack
1. The BPS12 is supplied with four 12-24 mounting screws for conventional 19” equipment racks. Zultys supplies M6
screws for metric threaded racks.
BPS12
Battery Power Supply