26
SAFETY
Factory Resetting your Zuli Smartplug
Unplug from the wall and remove your light or appliance from the Smartplug.
Hold down the button on the side of the Smartplug, then plug it in to your
powered outlet while continuing to hold the button. If done correctly, you will see
the Logo blinking red. Continue to hold the button until the logo stops blinking
and is solid red (about 10 seconds). Release the button and you should see the
white LED begin to glow again. If its still not working, please contact Zuli Support.
Warnings
• Only use in 120V AC Outlets.
• Keep all Heaters and Radiators at least 1 meter from all Smartplugs.
• Do not get wet or use outdoors.
Cleaning your Zuli Smartplug
First, make sure your Zuli Smartplug is removed from your outlet and fully
powered o
ff
. Pass a can of compressed air back and forth across the entire
Smartplug or gently wipe with a soft cloth. DO NOT USE WATER.
Summary of Contents for Smartplug
Page 1: ...SMARTPLUG USER GUIDE ...