Vario Press 100
Operations Manual
VP_0206E
26
Look at a Program
The “
look at a program
” feature allows the operator to view a program without changing any values:
1.
Press the “
Change Program
” button.
2.
Turn the
Silver Select Knob
until “
LOOK AT PROGRAM
” is now displayed.
3.
Press the
“Next”
button
to select this feature.
4.
Turn the
Silver Select Knob
to find the program you wish to view.
5.
Press the
“Next”
button
to continue through the program.
The first line in the display will identify the program being viewed. The second line displays a
parameter in the firing cycle program and its value. This parameter cannot be changed while looking
at a program. Pressing
“Next”
will let you look at the next item in a program, pressing
“Last”
will let
you look at the preceding item in a program.
When the last item has been viewed the display will
return to “Select Menu Button” screen. You may also stop viewing at any time by pressing one of the
menu mode selection buttons on the left of the keyboard.
Add a Program
Add a Program
is used to enter a new program. This selection will describe how to enter each type
of program as listed:
Low/High Fusing Porcelain Firing Cycle Program
Pressing Program
InCeram Firing Program
Special Porcelain Firing Cycle Program
Normal Firing Cycle Program
The first four firing cycles are normal porcelain firing cycles and are entered in the same manner. The
following procedure describes how to enter a normal porcelain program.
1.
Press the
“Change Program”
button.
2.
Turn the
Silver Select Knob
until “ADD A PROGRAM” is displayed
3.
Press the
“Next”
button.
0 SYNS –
OPAQUE
USE VACUUM - YES
Summary of Contents for Vario Press 100
