Zubler Vario Press 100, Operation Manual

Page: 25 / 56

Vario Press 100 Operations Manual
VP_0206E 25
The Change Program menu allows you to add, change, move, copy, print, or erase programmed
firing cycles. This mode is reached by pressing the “Change Program” button. All of the
features described here may be performed while a program is running.
Program Number/ Name Description
The
Vario Press 100 furnace uses a unique method of numbering and naming programs to help the
operator select the correct program to run. The following is an example of a program number / name.
The program number is “12”. The next four characters contain the program type (firing cycle). There
are several program types available:
NORMAL: Four normal porcelain firing cycles that can be named by the operator (see Chapter
Two: Special Functions under the heading “Porcelain Names”).
PRES:
Press firing cycles
CERM:
InCeram
firing cycles
SPEC: Special porcelain firing cycles
The next eight characters contain the name entered to describe this program. In the example the user
has entered BODY ADD to indicate that this is a body add on program.
The following example names describe how a user could make program identification easy:
10 SYNS- DE GAS Synspar porcelain de-gas program
11 SYNS- OPAQUE Synspar porcelain opaque program
12 SYNS- BODY ADD Synspar porcelain body add program
13 SYNS- GLAZE Synspar porcelain glaze program
20 VITA- DE GAS Vita porcelain de- gas program
21 VITA- OPAQUE Vita porcelain opaque program
22 VITA- BODY 1 Vita porcelain first body bake program
23 VITA- BODY 2 Vita porcelain second body bake program
24 VITA- GLAZE Vita porcelain glaze program
12 SYNS – BODY
ADD