Turbo timing
The function is just used in the long straightaway generally.
Activation Method
Including 3 activation methods. The turbo is just allowed to be activated when meeting the
activation condition; the turbo is not allowed to be activated when not meeting the activation
condition. If the activation condition is turned into ‘not meeting’, the turbo timing will be closed.
‘Full Throttle’
It is recognized to meet the activation condition when the continuous time in the full throttle is up
to the preset time.
‘RPM’
It is recognized to meet the activation condition when the motor RPM is faster than the preset
activation RPM.
‘Full Throttle and RPM’
It is recognized to meet the activation condition when the continuous time in the full throttle is up
to the preset time and the motor RPM is faster than the preset activation RPM. If either of them
doesn’t conform to the condition, it’ll be recognized to not meet the activation condition. The
purpose to have Turbo activated is to make sure that the vehicle has a certain RPM and
decreases the heat productivity of motor.
Turbo Delay
The function refers to the continuous full throttle time activating turbo requires. When turbo
activation method is set to ‘Full Throttle’, the turbo is just activated after the continuous full
throttle time is up to the preset time.
Start RPM
When turbo activation method is set to ‘RPM’, the turbo is just activated after the motor RPM is
faster than the preset activation RPM.
Turbo Slope ”ON”
When meeting the turbo activation condition, the turbo start to release at the selected speed.
E.g.: ‘6 deg/0.1sec’ indicates releasing turbo timing of 6 deg within 0.1 sec. The more it releases
within 0.1 sec, the faster the turbo releases, the faster the vehicle accelerates, the higher the
heat productivity of motor generates.
Turbo Slope “OFF”
When the turbo is activated, if the activation condition does not meet such as: slowing down to
turn in the end of straightaway, the ‘Full throttle’ will be turned into ‘Non full throttle’. When not
meeting turbo activation condition, if the turbo is closed instantly, an obvious slowing down will
occur such as: brake, which causes that the driveability becomes worse. If the turbo is closed at
a certain speed, slowing down will become linear relatively, the driveability will be better.
