Chapter 2 - Product Installation
T
A B L E
2 3 T
H E
F
I L T E R
M
A N A G E M E N T
P
A R A M E T E R S
Parameter
Description
Filter
Type
Selection
Select the IP filter to be viewed
IP Filter Set
Index
Select the IP filter set to be modified
Interface
Select the interface to be modified. PV0~PV7 and WAN
interfaces.
Direction
Select which direction of data flow to apply to the filters.
IP Filter Rule
Index
Select IP filter rule index to be modified.
Active
Toggle this rule index ON or OF with
Yes
or
No
.
Source
IP
Address
Enter the source IP address to deny access to the W300 router.
Subnet Mask
Enter the subnet mask of the source IP address.
Port Number
Enter the port number of the source IP address.
0
means that all
ports are allowed.
Destination IP
Address
Enter the destination IP address to deny access to the W300
router.
Subnet Mask
Enter the subnet mask of the destination IP address.
Port Number
Enter the port number of the destination IP address.
0
means
that all ports are allowed.
Protocol
Select the protocol to filter.
Rule Unmatched Select what happens to the data in question if the rule currently
editing is unmatched.
Next
means that the data is then
compared to the next IP filter rule.
Forward
means that the data
will be allowed into the user system.
Click
SAVE
to submit the changes, or
DELETE
to delete the rule with the
parameters, or
CANCEL
to exit without saving.
UPnP Management
Universal Plug and Play (UPnP) is an open networking standard that uses
TCP/IP for simple peer-to-peer network connectivity between devices. An
Proprietary Information of ZTE CORPORATION
41
