PPPoE Link
Up
Indicates whether the PPPoE connection is enabled (connected
to a modem) and the NAT type.
Service
Status
• GUI: shows the GUI status: running or stopped
• Phone: shows the phone status: running or stopped
Core Dump Download core dump file for troubleshooting when necessary.
Table 14: Device Configuration – Settings/Basic Settings
End
User Passw
ord
This contains the password to access the Web Configuration
Menu. This field is case sensitive with a maximum length of 25
characters.
IP Address The ZXV10 P802L operates in three modes:
1.
DHCP mode
: The ZXV10 P802L acquires its IP address
from the first DHCP server it discovers on its LAN. The DHCP
option is reserved for NAT router mode. In DHCP mode, all the
field values for the Static IP mode are not used (even though
they are still saved in the Flash memory).
2.
PPPoE mode
: To use the PPPoE feature, set the PPPoE
account settings (PPPoE account ID, PPPoE password and
PPPoE service name). The ZXV10 P802L establishes a PPPoE
session if any of the PPPoE fields is set.
3.
Static IP mode
: Configure all of the following fields: IP
address, Subnet Mask, Gateway, DNS Server 1, DNS Server 2
and Preferred DNS Server.
802.1x
Mode
This option allows the user to enable/disable 802.1x mode on
the phone. The default value is disabled. To enable 802.1x
mode, this field should be set to EAP-MD5. Once enabled, the
user would be required to enter the following information below
to be authenticated on the network:
Identity
MD5 Password
Line Keys x This allows the user to configure the account mapped to each
line key, as well as enabling SCA (Shared Call Appearance) for
the line.