Software Upgrade & Customization
Software (or firmware) upgrades are completed via either TFTP or HTTP. The
corresponding configuration settings are in the ADVANCED SETTINGS
configuration page.
Firmware Upgrade Through TFTP/HTTP
To upgrade via TFTP or HTTP, select TFTP or HTTP upgrade method.
“Upgrade Server” needs to be set to a valid URL of a HTTP server. Server
name can be in either FQDN or IP address format. Here are examples of
some valid URLs.
•
firmware.mycompany.com:6688/ZTE/1.2.3.5
•
72.172.83.110
There are two ways to set up the Upgrade Server to upgrade firmware: via
Key Pad Menu and Web Configuration Interface.
Key Pad Menu
To configure the Upgrade Server via Key Pad Menu options, select “Config”
from the Main Menu, then select “Upgrade”. Under this sub Menu, user can
edit Upgrade Server in either an IP address format or FQDN format. Choose
“
Save and use TFTP
” or “
Save and use HTTP
” to select upgrade method.
Select “Reboot” from the Main Menu to reboot the phone.
Web Configuration Interface
