ZXV10 ET301 User Guide
l
Ensure that there is no facility that impacts the heat dissipation of the device within
a 1-meter radius. Keep the heat dissipation holes of the device clean to prevent the
device from being overheated.
l
Do not hot swap
cables.
Requirements for Device Maintenance
l
Do not plug or remove input or output connectors frequently.
l
After the device is powered off, wait for at least 15 seconds before powering it on.
l
Keep the device clean.
l
Before cleaning the product, power it off, and remove the power cable. Use a soft and
dry cloth to clean the device case.
l
Power off the device and remove the power cable if the device will not be used.
Battery Security
l
Use batteries of the proper model and install them in accordance with the correct
polarities.
l
If a battery cannot be installed properly, do no forcibly press it, avoiding battery leakage
or explosion.
l
If a battery leaks, smokes, or releases a smell, replace it immediately.
l
Do not use old and new batteries together. Replace all the batteries if any battery
needs to be replaced.
l
If battery liquid drops on your skin or clothes, wash it with plenty of clean water
immediately, and go to hospital.
l
If battery liquid splashes onto your eye, do not rub the eye, but wash it with plenty of
clean water immediately, and go to hospital.
l
Remove the batteries if the device will not be used for a long period.
l
Dispose of exhausted batteries in accordance with the instructions.
Environmental Protection
Do not put scrapped devices into garbage cans. Abide by local regulations on how to
dispose of packaging materials, exhausted batteries, and scrapped devices, and support
recycling activities.
Class-A Product Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
1-2
SJ-20190419091840-001|2019-04-08 (R1.0)
ZTE Proprietary and Confidential
