13
Press
key to pause the program.
Press
key again to resume the program.
Input Operation
Change the input method.
Pairing operation
Press the
+
button for 3 seconds, start the match. The
remote control indicator light need continued rapid flashing 30 s
，
we can’t
cancel the pairing mode or flash light mode in the pairing time .After 30S
the indicator light goes out to exit the pairing mode.
Sleep mode and wake up
The remote control electric switch on, BT not connected would be into
the IR mode, no operation within 5s into dormancy
，
press any key
to wake up and send IR values.
BT connection condition without any operation, after 30s disconnect
BT into dormancy, press any key back connection after wake up.
Chapter
7
Troubleshooting
Problem
Possible Cause
Solution
The indicator is
not lit after
switching on the
STB.
The power adapter has
not been connected.
Connect the power
adapter.
The power adapter is
damaged.
Consult the service
provider and replace
