ZXR10 2900E Series Configuration Guide
3.
Sets port power supply priority. System provides three types of priorities for each
port. When the total power of all ports exceeds the device maximum output power,
the device will decide which devices are given power supply according to port
power supply priority. The port with high power supply priority will provide power
in advance. The port with lowest priority will stop power supply. If the two ports
have the same power supply priority, the priority of port will be decided by its port
number, the less the port number, the higher the priority and provide power in
advance.
4.
Provides the monitoring function for fan.
5.
Provides various alarm informations and abnormal monitors and alarm report
mechanisms such as Terminal log, SNMP Trap and Syslog.
Configuring PoE
The PoE configuration includes the following commands:
Command
Function
zte(cfg)#
set poe port
<
portlist
>{
enable
|
disable
}
Enables or disables the port function.
zte(cfg)#
set poe port
<
portlist
>
pd-max-power
{
15.4
|
4.0
|
7.0
|
ext.18
|
ext.27
|
ext.30
}
Sets the maximum power supply of the
port.
zte(cfg)#
set poe port
<
portlist
>
priority
{
critical
|
high
|
low
}
Sets the port power supply priority.
zte(cfg)#
set poe port
<
portlist
>
forcepower
{
enable
|
disable
}
Enables or disables the port force-power
function.
zte(cfg)#
set poe port
<
portlist
>
extend-detection
{
enable
|
disable
}
Enables or disables the port extended
detection function.
zte(cfg)#
set poe power maxvalue
<
1
–
500
>[
threshold
<
0-30
>]
Sets device maximum output power
and protection threshold.
zte(cfg)#
set poe port
<
port list
>
enable time-range
<
word
>
Enables the port PoE.
show poe device
(all configuration modes)
Displays the PoE status of the device.
show poe status
[
port
<
portlist
>] (all configuration modes)
Displays the PoE status of the port.
show poe config
[
port
<
portlist
>] (all configuration modes)
Displays PoE configuration information.
PoE Configuration Instance
l
Configuration Description
DUT device is directly connected to PD.
Configure power supply device of PS type. The type that supports power supply
includes ZXR10 2910E-PS,ZXR10 2918E-PS and ZXR10 2928E-PS . Take ZXR10
2918E-PS as an example, provide 15.4 W power supply complying with AF standard
for 16 ports. Each PD is about 13 W.
l
Configuration Procedure
zte(cfg)#set poe port 1-16 pd-max-power 15.4
4-8
SJ-20120409144109-002|2012-07-02(R1.0)
ZTE Proprietary and Confidential
