Chapter 4 Service Configuration
BASE-T and 100 BASE-TX. In the case that the current Ethernet Cat.5 cabling basic
structure is not changed, PoE can provide DC power supply for the device based on IP
(such as IP phone, wireless local network AP and network camera) when it data signals
are transmitted. PoE technology can reduce the cost mostly when the current structural
cabling security is ensured.
Figure 4-1
shows the typical PoE application.
Figure 4-1 PoE Application
ZXR10 2900E-PS series switch supports the following PoE features:
l
ZXR10 2900E-PS series switch includes ZXR10 2910E-PS,ZXR10 2918E-PS and
ZXR10 2928E-PS.The device can provide power supply for the PD complying with
802.3af/802.3at standard and the single port can provide up to 30 W power.
l
ZXR10 2900E-PS series switch supports both DC and AC power input. When ZXR10
2900E-PS series switch acts as a PSE, the maximum output power depends on the
RPS if the switch uses DC power input, or the maximum output power is 250 W if
the switch uses AC power input. A power module provides 400 W output power. To
replace a power module, read the instructions or name plate of the power module.
l
ZXR10 2900E-PS series switch provides the following configuration and management
functions for convenient use.
1.
Sets integrated device maximum output power.
2.
Sets port maximum output power.
4-7
SJ-20120409144109-002|2012-07-02(R1.0)
ZTE Proprietary and Confidential
