ZXMW NR8120A/8120D Maintenance Guide
Parameter
Description
Valid Result
1
indicates that the result is valid while
0
indicates that the result is
invalid. An invalid result indicates that unknown errors occur during the
calculation process, causing the result invalid. Normally, the displayed
query result is valid.
Source MP ID
Displays the MP ID configured for the end where the link trace transmit
function is initiated.
Destination MAC
Displays the MAC address configured for the end where the link trace
receive function is initiated.
TTL
Displays the number of hops that the LTM packet can be transmitted
after the transmit end of the LTR packet receives the LTM packet. If
TTL
is
0
, it indicates that the LTM packet will not be transmitted any more.
Node MAC
Displays the MAC address of the end where the MP that sends the
LTR is located.
Hit Flag
Indicates whether the LTM packet reaches the destination end. If it is
1
, the LTM reaches the destination end. If it is
2
, the LTM does not
reach the destination end. If
Hit Flag
of all the records is
1
and
TTL
is
larger than
0
(the number of records displayed is less than 20), users
can determine that the link fault is located after the source end of the
last LTR.
Start Time
Displays the starting time of the test.
End Time
Displays the ending time of the test.
8.
Select
ETH > OAM_CFM > AIS&LCK Info
from the left navigation tree. The
AIS and
LCK Information
pane is displayed on the right.
9.
Set
MD Name
,
MA Name
, and
MP ID Primary Key
, and click the
AIS Query
button
or the
LCK Query
button. The query result is displayed, indicating whether there is
any AIS packet or LCK packet received, see
Figure 3-12 AIS and LCK Information Pane
3-12
SJ-20150804150350-006|2015-09-17 (R1.0)
ZTE Proprietary and Confidential
