Zte ZXHN H3601, Maintenance Management Manual

Page: 31 / 89

5 Configure the Internet
Parameter Description
Packets Classification Criterion
All Interface Set radiobox On to enable all Interface.
Ingress If setting radiobox Off to disable all Interface, specify the data
traffic direction.
Source MAC Address Source host MAC address.
Destination MAC Address Destination host MAC address.
802.1p Specify the 802.1p value to modify the service priority.
VLAN ID Identifies a VLAN. Range: 0–4094. To ensure normal service
operation, the
VLAN ID must be the same as that set in upper-
layer configuration.
Level 2 Protocol The level 2 protocol includes: Unconcerned, IPv4, IPv6, ARP and
PPPoE .
Source IP Source host IP address.
Destination IP Destination host IP address.
DSCP DSCP value.
Level 3 Protocol The Level 3 Protocol includes: Unconcerned, TCP , UDP and
ICMP .
Source Port Source port number of the matching packets.
Destination Port Destination port number of the matching packets.
TCP ACK Set radiobox
On
to enable the function of TCP ACK.
Packets Classification Result
802.1p Re-marking 802.1p identifier value.
DSCP Re-marking DSCP identifier.
Queue Priority Range:1-8.
3. Click Apply button to apply the changes.
5.4 Configure the Security
5.4.1 Configure the Firewall Level
The section describes how to configure firewall level.
SJ-20200429083356-004 | 2020-07-23(R1.0) 5-11