Zte ZXHN H3601 Page 61 Maintenance Management Manual Download

Page: 61 / 89

6 Configure the Local Network

2. To enable the DHCPv6 and RA function, select the corresponding LAN interface or

SSID.

Note



Click

All On

to select all IPv6 Service-Port control types.



Click

All Off

to cancel all IPv6 Service-Port control types.

3. Click

Apply

button to apply the changes.

6.4 Configure the Route

6.4.1 Configure the Routing(IPv4)

The section describes how to configure routing(IPv4), which provides the parameters of
route(IPv4) configuration features.
The relevant information of Internet status includes

Routing Table

Static Routing

and

Policy Routing

Prerequisite

Before configuring routing(IPv4), make sure that the IPv4 WAN connection is created.

Steps

Routing Table

1. On the main page of the ZXHN H3601, select

Local Network > Routing > IPv4

the

Routing(IPv4)

page.

2. Click

Routing Table

to the configuration page, see

Figure 6-17

Figure 6-17 Routing Table Page

3. Click

Refresh

to refresh the information.

Static Routing

SJ-20200429083356-004 | 2020-07-23(R1.0)

6-15

Summary of Contents for ZXHN H3601


























































































Search results

Summary of Contents for ZXHN H3601

Reviews:

Related manuals for ZXHN H3601

Brands by name

Popular brands

Zte ZXHN H3601, Maintenance Management Manual

Search results

Summary of Contents for ZXHN H3601

Reviews:

Related manuals for ZXHN H3601

Brands by name

Popular brands