Zte ZXHN H2640, Maintenance Management Manual

Page: 34 / 116

ZXHN H2640 Maintenance Management Guide(TIM)
4-8 SJ-20200714160642-002 | 2020-07-27(R1.0)
Parameter Description
IPv4
IP Type

DHCP: The DHCP server automatically allocates a dynamic
IP address to the device.

Static: You need to specify a static IP address for the device.
By default, it is set to DHCP.
IP Address IP Address of ZXHN H2640.
Subnet Mask Subnet mask of ZXHN H2640.
Gateway It is usually the IP address of the ZXHN H2640 by default.
DNS1-DNS3
IP address of the DNS server for static connections. You can set
up to three IP addresses for the server. These IP addresses are
provided by the ISP.
NAT Enable or disable the NAT function.
IPv6
IPv6 Info Acquire Mode
Specifies how to acquire IPv6 information for the WAN
connection. It is valid only if the WAN connection supports IPv6.
The options are:

Manual :You need to set the global address, gateway, and
DNS acquisition modes.

Auto :The global address, gateway, and DNS acquisition
modes are automatically configured.
Request PD By default, the On button is selected.
Unnumbered Mode By default, the On button is not selected. If it is selected,
Specifies how to acquire the global IPv6 address.
GUA Allowed From Specifies how to acquire the global IPv6 address. It is valid only
when the IPv6 Info Get Mode parameter is set to be Manual
Mode. Options:

DHCPv6: The device acquires a global address through
DHCPv6. If no option is selected, it indicates that no address
acquisition mode is configured.

PD: You need to set a static IPv6 address.

SLAAC: The device generates a global address in
accordance with the RA packets from the upper-layer server.
GUA Mode of obtaining global address. If IPv6 Info Acquire Mode is
set to Manual, the GUA value must be entered manually.
PD Prefix Delegation. If IPv6 Info Acquire Mode is set to Manual, the
PD value must be entered manually.