Zte ZXHN H2640, Maintenance Management Manual

Page: 95 / 116

6 Configure the VoIP
SJ-20200714160642-002 | 2020-07-27(R1.0) 6-9
Parameter Description
Outgoing Other devices is called by ZXHN H2640.
3. Click Apply button to apply the changes.
6.8 Configure the POS
The ZXHN H2640 supports the access of POS machines.
1. On the main page of the ZXHN H2640, select VoIP > POS . The POS page is
displayed, see Figure 6-10 .
Figure 6-10 POS Page
2. Set the parameters. For a description of the parameters, refer to Table 6-9 .
Table 6-9 Parameter Descriptions for the POS
Parameter Description
POS on FXS1/POS on
FXS2
If the switch is selected, the outgoing/incoming call codec of the
interface is negotiated as G711a, which is used to support the access
to POS machine on this interface.If this switch is not selected, the
outgoing/incoming calls on the interface are negotiated in accordance
with the media configuration mode on the voice page.
3. Click Apply button to apply the changes.
Steps
Abstract