ZXHN H168NW User Manual
11
3.2 Hardware Connections
Introduction:
1. Use a RJ-11 cable to connect the line port of the splitter to the
RJ-11 port (the phone jack) on the wall.
2. Use another RJ-11 cable to connect the modem (or VDSL2)
port of the splitter with the line port of the gateway.
3. Use the third RJ-11 cable (when the customer requires to use
telephone at the same time) to connect the telephone set with
the phone (or TEL) port of the splitter.
4. Connect the Ethernet port of the device with 10/100BASE-T
port of the computer by using a network cable.
5. Plug in the power cord, and turn on the power.
If you do not want the Internet service or telephone voice
services to be provided at the same time, connect only the line
port of the gateway with the RJ-11 port (the phone jack) on the
