Zte ZXG10 OB06, Technical Manual

Page: 23 / 117

Chapter 1 - System Architecture
Confidential and Proprietary Information of ZTE CORPORATION 9
The software is distributed on boards. There is little correlation between
pieces of software. The board software is independent in function and
associates with each other through the internal interfaces.
The core software can be downloaded from the background, facilitating
service upgrade and version maintenance. It also provides external
interfaces, through which the software can be maintained, OB06
information can be collected, and OB06 local tests can be performed.
The internal software of ZXG10 OB06 (V1.0) is composed of four parts:
Controller & Maintenance Module (CMM), Frame Unit Controller (FUC),
Channel Codec Module (CHP) and Carrier Interface Processor (CIP).
Different software platforms are adopted for the software according to
their functions, as shown in Figure 6.
F
I G U R E
6 S
O F T W A R E
M
O D U L E S O F T H E
Z X G 1 0 O B 0 6 ( V 1 . 0 )
Sys
te
m
so
ftw
are
CMM software module
FUC software module
CHP software module
CIP software module
CMM
The CMM of ZXG10 OB06 (V1.0) provides the following functions:
Status management;
Configuration management
Device management;
Monitoring management
Test management
Database management
Supporting local O&M function, including local parameter configurations
and alarm query