Zte ZXG10 OB06 Technical Manual Download Page 11

Page: 11 / 117

Confidential and Proprietary Information of ZTE CORPORATION

About this Technical Manual

The ZXG10 is a GSM mobile communication system independently

developed by ZTE Corporation. It is composed of the ZXG10-MSS mobile
switching subsystem and the ZXG10-BSS base station subsystem. The
ZXG10-BSS Base Station Subsystem provides and manages radio

transmission in GSM, and it is composed of the ZXG10-BSC Base Station
Controller and the ZXG10-BTS Base Transceiver Station.

ZXG10 OB06 is one of the ZXG10-BTS series of base transceiver stations,
and is an integrated outdoor BTS for GSM. Installed outdoors, the ZXG10

OB06 features high capacity, compactness, high reliability, high
performance/cost ratio, complete functions, and powerful capability of

service supporting.

Purpose of this Technical Manual

The

ZXG10 OB06 (V1.0) Compact Outdoor BTS for GSM—Technical Manual

introduces the working principle, functions and technical features of the

ZXG10 OB06 (V1.0) compact outdoor BTS for GSM, enabling the user to
have an all-around understanding of the technical features of the ZXG10

OB06 (V1.0).

The whole set of documents also include:

ZXG10 OB06 (V1.0) Compact Outdoor BTS for GSM Guide to

Documentation

ZXG10 OB06 (V1.0) Compact Outdoor BTS for GSM Hardware Manual

ZXG10 OB06 (V1.0) Compact Outdoor BTS for GSM Installation Manual

ZXG10 OB06 (V1.0) Compact Outdoor BTS for GSM Maintenance

Manual—Routine Maintenance

ZXG10 OB06 (V1.0) Compact Outdoor BTS for GSM Maintenance

Manual—Emergency Handling

ZXG10 OB06 (V1.0) Compact Outdoor BTS for GSM Maintenance
Manual—Troubleshooting

This manual includes five chapters.

Summary of Contents for ZXG10 OB06






















































































































Search results

Summary of Contents for ZXG10 OB06

Reviews:

Related manuals for ZXG10 OB06

Brands by name

Popular brands

Zte ZXG10 OB06, Technical Manual

Search results

Summary of Contents for ZXG10 OB06

Reviews:

Related manuals for ZXG10 OB06

Brands by name

Popular brands