Zte ZXG10 OB06, Technical Manual

Page: 96 / 117

ZXG10 OB06 ZTE Integrated Outdoor GSM Base Station Technical Manual
82 Confidential and Proprietary Information of ZTE CORPORATION
Table 8 shows the number of configured carriers for all 80 W TRXs and the
correspondence between CDUs/CEUs and antennas configured in one cell.
T
A B L E
8 N
U M B E R O F
C
O N F I G U R E D
C
A R R I E R S F O R
A
L L
8 0 W T R X
S A N D T H E
C
O R R E S P O N D E N C E B E T W E E N
C D U
S
/ C E U
S A N D
A
N T E N N A S
C
O N F I G U R E D I N
O
N E
C
E L L
TRX
Quantity Antenna Quantity and
Configuration
CDU Quantity CEU Quantity
1 2, TX/RX, RX 2 -
2 2, TX/RX, TX/RX 2 -
3 2, TX/RX, TX/RX 2 -
For different configuration requirements of different site types, the
combinations listed above can be used.
Expansion Configuration
In general, 1 to 3 cabinets may be configured in a site to enlarge
subscriber quantity, and it is recommended to configure cabinets as few as
possible. In case of 40 W configuration, the ZXG10 OB06 (V1.0) can be
configured as S2/S/S at most. In case of 80 W configuration, the ZXG10
OB06 (V1.0) can be configured as S1/3/3 at most.
Configuration Examples
The ZXG10 OB06 (V1.0) has multiple configuration modes with different
combinations, and all configurations are based on the user requirements
and network planning. Therefore, system configuration modes vary with
different application sites. A site is typically configured as an omni-
directional site, 2-sector site or 3-sector site.
Configuration Examples of O-type Sites
Here is the configuration of 40 W and 80 W O1/O2/O4/O6-type sites.