Zte Z6200, User Manual And Safety Information

Page: 29 / 36

27

To set the OBD2 device
’s LAN options:

On the 4G Mobile Hotspot configuration page, log in as Administrator.

Select Settings > Router Settings .

Enter the desired information in the each section.

If the DHCP Server is enabled, it automatically assigns an IP address to each device on the
network and manages their configuration information.

Select Apply .
Troubleshooting
Problem Suggested Solution
Cannot establish
the Wi-Fi
connection
between your
device and client.
•
Refresh network list and select the correct SSID.
•
Check the IP address to make sure your client can obtain an IP
address automatically in the Internet protocol (TCP/IP)
properties.
•
Type the correct network key (Wi-Fi password) when you
connect to your OBD2 device.
The client
connected to the
device cannot
access the
Internet.
•
Make sure your micro-SIM card is available.
•
Ensure that the roaming status is turned on. Once turned on and
your OBD2 device connected to mobile network, the LED2
indicator turns green. Select
Settings > Network Settings >
WAN Connection Mode Settings on the 4G Mobile Hotspot
configuration page to check the box under Automatic .
•
Contact your service provider.
Cannot visit the
4G Mobile Hotspot
configuration
page.
•
Enter the correct address. The default address is
http://192.168.0.1.
•
Only use one network adapter in your PC.
•
Do not use any proxy server.