Zte Z6200, User Manual And Safety Information

Page: 12 / 36

10
Installing your OB2 Device

Make sure your vehicle is parked outside in a safe location and the engine is turned off.

Connect your OBD2 device into the OBD connector port ( or into the extension cable if it is
required
– not included
). Ensure that your OBD2 device is connected in the correct direction.
NOTE:
Do not insert your OBD2 device rudely so as to avoid the damage of the device.

OBD interface connect with OBD connector on your vehicle to power on your OBD2 device.
The OBD (On-Board Diagnostics) connector is usually located on or under the dash, on the
driver’s side. Other possible locations are at the center console area or inside the glove
compartment.